Electronic Fabric Strength Tester SX-065AC

Introduction:
1. This instrument has high-end configuration and multiple uses. It can carry out six types of tensile tests, including constant speed, timing, and fracture, with menu-based selection and flexible switching.
2. This instrument adopts the constant rate of extension (CRE) detection mechanism and is controlled by a microcomputer;
3. This instrument has an overload protection function, so there is no need to worry about damage caused by overload or collision of fixtures
4. Large LCD display, easy to set up program;
5. Automatically process data and print out, making the test accurate, fast and convenient;
6. With power-off memory function;
7. The return speed can be set;
8. Lightweight structure, low noise and good heat dissipation;
Calibration can be completed with weights above 9.50N.
10. Equipped with 1000N pneumatic grab and conventional clamps for easy operation.

standards: GB/T3923.1/2, FZ/T7000, ISO13934.1/2, ASTM D5034, ASTM D5587, GB/T 13772.1/2/3, FZ/T01085, IS013935.1/2, ASTM D5035, ASTM D3936, GB/T8687, FZ/T01030, ISO4606, ASTM D2261, JIS L1093, GB/T3917, FZ/T70007, IS09073.3/4, ASTM D4964, BS DIN, etc.

Specification:
1. Maximum force measuring range: 100.0 N ± 0.1N (small range), 2500 N ± 1N (high range)
2. Force measurement error: less than ±1%
3. The distance between the upper and lower clamps can be selected from 0mm to 500mm.
4. Maximum extension range: 1000mm
5. Pre-tension value: 1N, 2N, 5N
6. Break time error: ±0.01s
7. Stretching speed range: 2mm/min～1200mm/min, can be set arbitrarily (the widest speed range of China’s fabric strength tester)
8. Data output content: large screen LCD display, report form print output
9. Volume: 450mmX380mmX1500mm
10. Power supply: AC 220V±10% 50Hz
11. Power: 0.6kW
12. Net weight: 125Kg
Function:
1. Breaking strength
2. Fixed length elasticity
3. Fixed load elasticity
4. Peel strength
5. Bursting strength
6. Tearing strength
7. Relax
8. Creep
9. Fixed load stretching
10. Fixed length stretching
11. Stretch recovery
12. Fixed length sliding
13. Fixed load slip
14. Needle clamp slippage
15. Seam strength
16. Seam unfastened