Whole shoe static waterproof tester SX-XZ16

Application：
Put the waterproof finished shoes into the test sink, so that the test water level is 15mm away from the suture point of the back side of the shoes and the tongue of the shoes, and evaluate whether there is water leakage on the inner surface of the waterproof finished shoes within the specified time.
Standards：
GB/T12018etc.
Specifications:
1. Test station: 2 samples can be tested at the same time.
2. Time setting: (0 to 99 hours and 99 minutes) can be set.
3. Water leakage device: automatic sensing water leakage, and alarm.
4. Volume: (47x42x39)cm.
5. Weight: about 28kg.
6. Power : AC220V,50W